Loading...
Ferroli · EN 12828
Technical Datasheet & 2D Drawing (GI-FERROLI-009)
Dimensional & hydraulic connection schematic
Metalinė aklė 1″ (kairinė), baltos spalvos – GI-FERROLI-009 – Ferroli GI-FERROLI-009 serija inžinerinis komponentas, skirtas…
Shipped from central warehouse (delivery 2–4 bus. days)
Material / Spec: Lieto aliuminio sekcijos (POL 500) arba šalto valcavimo plienas 1,25 mm (Tipas 22)
Užtikrina 70% konvekcinį ir 30% spindulinį šilumos atidavimą net prie 55/45 °C režimo.
Vienvamzdė vs dvivamzdė sistema: sovietiniame stoviniame name su „permyčka“ privalomas Danfoss RA-G (Kvs ≥ 2,3), dvivamzdėje – RA-N arba Heimeier Eclipse AFC.
All [01–06] sub-assemblies, adapters, and gaskets stocked at Eigulių St. 21, Kaunas warehouse (10+ yr service support).
Vytautas engineering compatibility note (GI-FERROLI-009)
Verified mating components for Ferroli (GI-FERROLI-009) matched by connection standard (DN / thread / M30×1.5 / RA Click) and hydraulic compatibility.
Yes, this Ferroli unit (SKU GI-FERROLI-009, category: Radiators & convectors) is manufactured to European EN 12828 hydronic standards. Verify the connection thread or nominal size (e.g. DN15 1/2", DN20 3/4", M30×1.5 or Danfoss RA Click) – our engineering advisor Vytautas lists directly compatible mating components on this page.
Genuine Ferroli components use corrosion-resistant alloys (DZR brass, bronze or stainless steel) and calibrated flow paths, preventing valve sticking, water-hammer noise and premature seal leaks over 10+ heating seasons.
When installing Metalinė end cap / plug 1″ (kairinė), baltos spalvos – GI-FERROLI-009 (GI-FERROLI-009, retail price 1,40 €), check whether you need matching union tailpieces, Eurocone adapters, a mating thermostatic head or actuator. See the compatible parts section above.
Always observe the flow-direction arrow on the housing, depressurise the loop before fitting, and never apply hemp or tape onto flat union gaskets or O-ring cones.
Ferroli Metalinė aklė 1″ (kairinė), baltos spalvos – GI-FERROLI-009 (GI-FERROLI-009) – patikrinkite jungties sriegį ir sistemos parametrus prieš montavimą.
Suderinamumą pasitikslinkite su mūsų inžinieriumi (+370 693 97098) arba pagal įrenginio techninį pasą
Source: Manufacturer technical catalog (Danfoss / IMI Hydronic / HERZ / Haier / Gorenje 2025–2026) and LST EN 215 / EN 12828 / EN 303-5 standard
Verification note: Solid-fuel boiler door aperture and flange dimensions vary by production year and kW rating – before ordering a door conversion kit or pellet burner, verify exact dimensions against the boiler passport or with a „Gilės inžinerija“ engineer (+370 693 97098).
Confirm that GI-FERROLI-009 connection matches the supply/return pipework and flow direction arrow.
Depressurise the heating circuit, fit the union tailpiece and tighten to factory torque.
Adjust the flow scale (Kvs / l/h) or controller setting according to room or boiler loop load.
Refill the loop, vent trapped air and verify leak-free operation under operating temperature.
Engineer pro tip: When installing Ferroli (GI-FERROLI-009), never wind hemp onto flat gasket seats or Eurocone O-ring cones – seal only tapered pipe threads.
Ceramic ignition element (tinka Megatherm MPB, Pelltech, Viadrus, Kalvis)
